13mm Irrigation Fittings Kit – 20 Piece Feed Line Kit
13mm Irrigation Fittings Kit – 20 Piece Feed Line Kit
Type: Irrigation fittings kit
The core fittings for a 13mm feed line, with reducer tees to branch off 4mm drip lines.
13mm Feed Line Kit (20 Piece) – The Backbone of a Watering System
A 13mm pipe is the main artery of most garden and greenhouse irrigation systems. It carries water along a bench, a bed or a row of pots, and the 4mm drip lines branch off it to each plant. This kit gives you the fittings to build that backbone: tees and elbows to route it, joiners to extend it, end plugs to finish it, and reducer tees to branch off your 4mm drippers.
What's in the Box
- 4 × 13mm tees: branch the main line
- 4 × 13mm elbows: turn corners without kinking
- 4 × 13mm joiners: extend or repair pipe
- 4 × 13mm end plugs: close off each run (and pull out to flush)
- 4 × 13mm to 4mm reducer tees: branch a 4mm drip line off the main pipe
Perfect For
- Greenhouses and raised beds
- Allotments and veg plots
- Grow rooms with several rows of pots
How to Fit
- Cut the pipe square with a sharp knife or pipe cutter.
- Soften the pipe end in hot water for a few seconds.
- Push it firmly over the barb until it reaches the shoulder of the fitting.
Fits pipe with a 13mm internal diameter. For pumped systems, see our double barb fittings in the Pick & Mix.
🌿 Rose's Pro-Tip: fit an end plug, not a fold-over, at the end of each run. In spring you can pull it out and flush any debris through the line before the season starts.
Black Flag Horticulture Ltd, Coventry.